EN
22
CONNECTION
1.
Connect the left and right speakers to the OUT-L/OUT-R jacks on the
back of the unit.
2. Connect the power supply unit to the power input socket on the back of
the unit and the mains socket.
3. Press the POWER button on the device to turn on the player.
MODE SELECTION
CD mode
1.
Press the MODE button to enter CD mode.
2. Press the OPEN/CLOSE button on the unit or on the remote control to
open the CD tray.
3. Insert a CD into the CD compartment with the label facing up and press
the OPEN/CLOSE button again to close the CD compartment.
4. Use the controls on the unit or on the remote control to start playback
of the inserted CD.
BT mode
•
When you use your BT device with this player for the first time, you must
pair it with the player first.
•
Start BT on your external device (e.g. smartphone or tablet).
•
Then select the "Berklee" player in the BT device list and connect to the
player.
•
When both units are successfully paired, a beep sounds. If the pairing
device is disconnected, a beep also sounds.
FM radio mode
The radio antenna can be found on the back of the device. If you want to
listen to the radio, pull out the antenna completely.
1.
Press the MODE button to enter FM mode.
2. In FM mode, press the SCAN button on the remote control to
automatically scan for stations. After the search is completed, the
stations found are automatically saved.
3. Press the
or
select the desired station.
button on the device or on the remote control to