DJI MATRICE 30 Serie Kurzanleitung Seite 7

4. Preparing the Aircraft
Unfolding the Aircraft
1. Unfold the frame arms on both sides in the same way.
Make sure the frame arm folding buttons pop out so
that the frame arms are locked firmly.
2. Unfold the propellers and rotate the gimbal pitch axis to
0° to unlock the gimbal.
Push to the end and hold the frame arm folding button to fold
the frame arm.
Follow the diagram to fold and store the propellers.
Power off and rotate the gimbal pitch axis to +90° to lock the
gimbal after each operation to protect the gimbal.
Mounting the TB30 Batteries and Checking the Battery Level
1. Insert two TB30 batteries. Make sure the battery release
toggles are in the same position as shown in the diagram.
2. Press the battery level button to check the battery level.
Adjust the battery release toggles to the
position shown to remove TB30 batteries.
6
High
Low