Corsair XENEON 32UHD144 Bedienungsanleitung Seite 16

OPERATION
OSD – System Setting
SETTING
Aspect Ratio
AMD FreeSync Premium
LED
Source Detection
USB-C Alt Mode (only
present when the display
is connected through
USB-C video port)
Factory Reset
ENGLISH
OPTIONS DESCRIPTION
Selects the display's aspect ratio. "Auto" will try to match the
Auto, 4:3,
display's aspect ratio to the incoming video signal. Not available
16:9
with Adaptive Sync enabled
Enables or disables the adaptive sync functionality when
connected to a compatible GPU. Select ON to enable Adaptive
Sync for AMD FreeSync via HDMI
NVIDIA G-Sync compatibility is available when connected via
DP cable or USB Type-C Alt Mode cable to compatible GPU.
For NVIDIA G-Sync functionality:
• Install/Open NVIDIA Control Panel
ON or OFF
• Select "Set up G-Sync"
• Select Enable G-Sync Compatible checkbox
• Select the 32UHD144/RDD0021
• Select the "Enable settings for the selected display model"
checkbox
May require a system reboot to access NVIDIA settings
ON or OFF Selects front Power LED indicator ON or OFF
Determines whether the display will automatically switch to
AUTO or
a different input if it detects a signal, or if you will need to
MANUAL
manually switch between inputs
Toggles the number of USB lanes to use on the USB-C port
for video
4-lane
• 4-Lane Mode allows up to 3840x2160@144Hz resolution
2-lane
but creduces the speed of the USB Type-A ports to USB 2.0
• 2-Lane Mode allows for up to 3840x2160@60Hz but
enables USB Type-A at USB 3.0 speed
- Resets all monitor settings to their factory defaults
15