Philips NeoPix Ultra 2 Bedienungsanleitung Seite 26

Problems
The projector does not react to remote
control commands.
Measures to take if Screen Mirroring does
not work anymore after a firmware update
of an Android or iOS device?
Screen mirroring does not work with the
available Android device.
When I view videos, the sound or the
picture is sometimes distorted or the sound
is not synchronized to the picture.
The temperature of the projector's surface
is warm.
What to do if the projector does not work
when connecting to a notebook PC?
Service
Solutions
• Check the batteries of the remote control.
• We recommend checking regularly for new
firmware of your projector (see Update software,
page 23).
• In order to allow screen mirroring, your device
must support Miracast. Not all Android devices
support this function. The function name can be
also known as Screencast, Screen Sharing, WiFi
Direct, Wireless Display, etc..
• Please refer to the user manual of your Android
device to check if this function is supported and
how it can be enabled.
• The available WiFi bandwidth is insufficient for
sending the video flawlessly from the smartphone
to the projector. This can happen if one or more
WiFi networks operate in the same frequency
range nearby. Certain IoT devices (e.g. ZigBee
enabled devices) also operate in this frequency
range.
• Your smartphone is not fast enough to compress
the screen data and send it simultaneously over
WiFi.
• Your smartphone may maintain parallel
connections to your home network and
the projector. This will reduce the available
bandwidth. Disabling temporarily the connection
to your home network may help.
• For this projector it is normal to generate
moderate heat during operation.
• Check that the HDMI cable is plugged in correctly.
• Make sure that the notebook PC has been
switched to projector display.
25