Restore Default Settings; Projector System Settings - Philips NeoPix Ultra 2 Bedienungsanleitung

• Check an app version, app size and cache
size.
• Clear cache size or uninstall an app.

Restore default settings

1 Go to System Update then select Restore
Factory.
2 Follow the on-screen instructions to start or
cancel resetting.
Notice
After resetting to the default settings,
all the files and apps you installed are
completely erased. Back up your files if
you need to reset the projector.
Other system settings
Go to Other Setting to access the following
settings.
• Boot Source Option: Select or deselect an
input source to start up the projector.
• Mouse speed: Change the speed at which
the on-screen point moves.
Change settings
System information checking
Go to System Info to check the following system
information: product name, system version, free
and total internal memory, free and total ROM,
and MAC address.

Projector system settings

1 Press or on the remote control to
access the projector system setting options.
Use the Navigation buttons and OK to select
2
and change settings.
Input source selection
Go to Input Source to access the following
settings.
• Select and activate an input source (HDMI1,
HDMI2, VGA, AV) corresponding to an
external device which is connected to the
projector.
• Select Philips OS when a USB storage
device is connected or no other external
device is connected.
21