Waeco TC14FL-AC Bedienungsanleitung Seite 23

TC
✓ The red or blue operating display lights up and the device starts to cool/
heat.
➤ When you want to finish the cooling or heating process, press the button
"ON/OFF" (fig. 2 A, page 4).
➤ When you stop using the cooler, disconnect it from the mains.
6.5 Select temperature
The status display of the temperature (fig. 2 F, page 4) indicates the select-
ed temperature range. With an increasing number of illuminating LEDs, the
intensity of the temperature range also increases.
I
NOTE
The following temperature indications are subject to tolerances
and are dependent on the measuring position.
Interior space-temperature at approx. 25 °C ambient temperature:
Status display
seven illuminating LEDs
Cooling
an illuminating LED
seven illuminating LEDs
Heating
an illuminating LED
➤ If you want to select the temperature to cool/heat, press the button
"Temp" (fig. 2 F, page 4), until the requested temperature range is
reached.
6.6 Connect to the cigarette lighter
I
NOTE
When you connect the cooling box to the cigarette lighter of your
vehicle (fig. 3, page 4), observe that you have to turn on the igni-
tion, if necessary, so that the device is supplied with current.
EN
Temperature range
approx 0 °C in the interior space
approx 16 °C in the interior space
(ECO mode)
approx 66 °C in the interior space
approx 48 °C in the interior space
Operation
23