Cleaning, Care & Maintenance; Cleaning The Condenser - Polar DB319 Bedienungsanleitung

Cleaning, Care & Maintenance
Switch off and disconnect from the power supply before cleaning
• Clean the interior of the appliance as often as possible.
• Do not use abrasive cleaning agents. These can leave harmful residues.
• Always wipe dry after cleaning.
Condensation will form in refrigeration with frequent opening of the doors and on hot humid
days, please ensure condensation is allowed to drain properly or is wiped dry.

Cleaning the Condenser

Periodic cleaning of the Condenser can extend the life of the appliance.
POLAR recommend that a POLAR agent or qualified technician clean the condenser.
• The appliance is designed for display purpose only and not for storage.
• The appliance should be switched off when not in use.
• Carry out a manual defrost if excessive ice is present.
• Remove any water that may be present before usage.
Troubleshooting
A qualified technician must carry out repairs if required.
Fault
The appliance is not
working
The appliance is not
cooling
The appliance is noisy
Error code EE4
DB319_ML_A5_v3_20220321.indb 5 DB319_ML_A5_v3_20220321.indb 5
Probable Cause
The unit is not switched on
Plug or lead are damaged
Fuse in the plug has blown
Mains power supply fault
Coolant Leak
Fan Motor Failed
Airflow to the condenser
obstructed
Condenser is clogged
Appliance is not level
Appliance is too close to a wall or
other object
• Restricted Airflow
• Blocked Condenser
Solution
Check the unit is plugged in correctly and
switched on
Replace plug or lead
Replace the fuse
Check mains power supply
Call POLAR agent or qualified technician
Call POLAR agent or qualified technician
Increase the gap between appliance and
obstacles/heat source
Clean the condenser
Adjust position to make it level
Move to a more suitable location
• Increase airflow
• Clean the condenser
EN
5
2022/3/21 14:06 2022/3/21 14:06