Refrigerator Light - Atag KS33102B Bedienungsanleitung

EN
Use & Care guide

Refrigerator light

The light system inside the refrigerator compartment uses LEDs light, allowing a better lighting than traditional light bulbs as
well as a very low energy consumption. Contact the Technical Assistance Service if you need a replacement.
Important: The refrigerator compartment light switches on when the refrigerator door is opened.
Replacing the led light bulb (depending on model)
Always disconnect the appliance from the power supply before replacing the light bulb. Then follow the instructions
based on the type of light bulb for your product. Replace the light bulb with one with the same features, available from the
Technical Assistance Service and authorised sellers.
Light type 1)
To remove the light bulb, unscrew it in an anti-clockwise direction, as shown in the
figure. Wait 5 minutes before reconnecting the appliance.
LED light bulb (max 25W)
Light type 2)
If the product has LED lights, as demonstrated in the figures below, contact the Technical Assistance Service if you need a
replacement. LEDs last longer than traditional light bulbs, improve internal visibility and are environmentally-friendly.
Shelves
All of the drawers, door shelves and shelves can be removed.
Door
Door reversibility
Note: The direction of door opening can be changed. If this operation is performed by After-sales Service it is not covered by the warranty.
Follow instruction in Installation Guide.
2