Installation And Setup - clearaudio electronic Emotion SE Bedienungsanleitung

User manual / Bedienungsanleitung
3. Installation and set up
Emotion SE
The setup and installation of the is done quickly and very easy.
Please use the white gloves during this procedure, to avoid scratches.
1.)
You should consider a safe and clean working area for the installation, as near as possible to the
Emotion SE
final position of the turntable.
First take out the motor and tonearm of the packing. Now you should take out the first packing layer.
Emotion SE
After that you can take out the turntable chassis from the next packing layer.
Place the turntable body on a clean underlay.
To avoid any damages to your bearing, the turntable platter should achieve room
temperature before the set up begin (approx. 20 ° Celsius).
2.)
Take the upper bearing part and place it on the lower bearing part, which is already integrated in the
chassis (picture 3).
3.)
Place the platter with both hands carefully onto the bearing.
Through a lightly (!!) up and down movement the platter will slip onto the bearing upper part
(picture 4).
Avoid major side force to prevent any damages to the ceramic bearing!
Pic. 3: Placing the bearing Pic. 4: Placing the platter
Make sure with gentle pressure that the platter is applying on the complete surface of the bearing.
Made in Germany Page / Seite 9