clearaudio electronic Emotion SE Bedienungsanleitung Seite 16

User manual / Bedienungsanleitung
Satisfy Kardan
Now connect your
You can find more information on adequate phono-preamplifiers and interconnects on our Website:
www.clearaudio.de
Only if you have static problems with your record, then it is necessary to ground your bearing.
Please connect the ground wire with the bearing on the upper side of the chassis (see pic. 14).
Pic. 14: Connecting the ground wire to
the turntable
The setup is now completed.
Please pay attention!
Emotion SE
If the is a longer time not in use, please switch the turntable on the main switch on the
motor completely off!
You will find the main switch on the motor (see picture):
Pic. 15: Main switch
We wish you a lot of pleasure with your new
Your Clearaudio Team
Page / Seite 16
tonearm with the phono input of your phono-preamplifier.
I = ON
O = OFF
Emotion SE
turntable.
© clearaudio electronic GmbH, 2022-11