Installation - Configuration - Main menù
5. INSTALLATION
The touch screen must be connected according to the following diagram:
01500
+
BUS
or
-
01501
AUX
6. CONFIGURATION.
The touchscreen is configured with the Touchscreen Configurer software and the programming interface
01998.U; using the ETS project database with which the system has been configured, select the functions
(groups, scenarios, etc.) that you want to control via the touchscreen.
The Touchscreen configurer software can be downloaded free of charge from the "Product Software" section of
the website www.vimar.eu.
N.B. The touch screen can also be configured by using the software via the interface 01998.U.
All the updated ETS databases can be downloaded from the Product Software section of the website www.
vimar.eu.
7. MAIN MENU'.
Once the touch screen has been configured with the Touchscreen Configurer software, the opening screen is
displayed containing the various sections for the control/command of the whole system.
Touching the icon
16
20848
14848
gives access to the Settings menu.
Automation Devices