Electrolux EFC9360 Bedienungsanleitung Seite 45

Replacing the Charcoal Filter
This fi lter cannot be washed or regene-
rated. It must be replaced when the C
appears on the display or at least once
every 4 months. The fi lter saturation
alarm has to be activated already befo-
re.
Enabling/Disabling the alarm signal
• In the recycling version hoods the fi l-
ter saturation alarm must be activated
during the instal-lation or later.
• Switch off the hood and the lights.
• Press the E-key for about 5 seconds
until the last two segments of the mo-
tor LEDS are lit on the display.
• By releasing the E-key the clock icon
starts to fl ash.
• Within 3 seconds press the D-key to
activate/deactivate charcoal fi lter sa-
turation alarm.
• C-symbol lit - charcoal fi lter satura-
tion alarm ACTIVATED.
• C-symbol unlit - charcoal fi lter satu-
ration alarm DEACTIVATED.
Maintenance
Reset the alarm signal
• Switch off the motor and the lighting
system.
• Press the G-key for at least 2 sec-
onds.
Replace the Filter
• Close the suction panel.
• Remove the metal grease fi lters.
• Remove the saturated charcoal fi lter,
turning the fasteners provided.
• Fit the new fi lter and fasten it its cor-
rect position.
• Put the metal grease fi lters in their
seats.
• Close the suction panel.
Light replacement
20 W halogen light.
• Remove the 2 screws fi xing the Ligh-
ting support, and pull it out of from the
Hood.
• Extract the lamp from the Support.
• Replace with another of the same
type, making sure that the two pins
are properly inserted in the lamp hol-
der socket holes.
• Replace the Support, fi xing it in place
with the two screws removed as abo-
ve.
electrolux 45
EN