Control Board - Electrolux EFC9360 Bedienungsanleitung

42 electrolux
USE
A
B
EN
Key Function
A Switches the extractor motor on and off at the latest
selected speed
B Decreases the suction speed.
C Increases the suction speed.
D By pressing this key it is possible to start the intensive
speed from any previously selected speed except
the Delay-function and 24H-function. This speed has
been timed at 10 minutes. After that time the system
activates automatically the latest selected speed.
This function is suitable for cooking conditions when
vapours and smells are at the utmost emission.
E By pressing this key it is possible to set up the motor
to a suction speed at 100 m3/h .
F By pressing this key it is possible to set the delayed
shutdown of the motor and the lighting to 30 minutes.
This function is suitable for a complete elimination of
residual cooking odours. Functioning only when the
motor is on(not during the 24H-function or intensive
function). By pressing the key the function is stopped
G By pressing this key for about 2 seconds it is possible
to reset the fi lter saturation alarm
H By pressing this key the intensity of the lighting system
can be decreased.
I Switches on/off the lighting system at the maximum
intensity.
L By pressing this key the intensity of the lighting system
can be increased.
Keyboard lock: it is possible to jam the keyboard when, for example, cleaning the
glass. The motor and lights are switched off.By pressing the F-key (Delay) for about
5 seconds the keyboard block can be activated or de-activated. This function is
confi rmed by a Beep and by moving motor LEDS on display.
Use
C E
D

Control board

Display
Indicates the selected speed.
The number of lit LEDS decreases.
The number of lit LEDS increases.
I fl ashes and the LEDS are all lit.By pressing
the key the function is stopped.
24 appears and the LEDS extinguish one
by one.By pressing the key the function is
stopped
A fl ashing clock-symbol appears.By
pressing the key the function is stopped
After 100 working hours a drop-symbol
appears. Metal grease fi lters have to be
washed.After 200 working hours C appears.
Charcoal fi lters have to replaced.
F G
I
H
L