Fanaway Fraser Installationsanleitung Seite 12

Fanaway Fraser Installation Instructions
BUTTONS ON THE REMOTE
HI: Press the button to set fan running at High speed.
MED: Press the button to set fan running at Medium speed.
LOW: Press the button to set fan running at Low speed.
OFF: Press the button to turn OFF the fan.
: Press the button to turn ON/ OFF the light.
The remote has memory function. If the fan or light is turned off by
the isolating switch, it will memorise and recover the last status when
turned on next.
INSTALLATION OF THE REMOTE CONTROL HOLDER (Fig. 14)
1. Locate a suitable wall or surface to
fix the remote control wall holder.
2. Remove the screw cover and install
the holder using the 2 screws and
re-install the screw cover. (Fig.14a).
3. Slide the remote into the holder.
(Fig. 14b).
REVERSING FUNCTION (Fig. 15)
Your ceiling fan can operate in either summer or winter mode.
SUMMER Mode: The reverse switch should be in the SUMMER position to rotate the fan in an anticlockwise
direction. The airflow will be directed downwards, for cooling in summer.
WINTER Mode: The reverse switch should be in the WINTER position to rotate the fan in a clockwise direction.
The airflow will be directed upwards assisting in the circulation of warm air, for energy conservation in winter.
11 | P a g e
Fig. 14a
Fig. 15
Fig. 13
Fig. 14b