How To Use The Buttons; Auto Operation; Cooling/Heating/Fan Operation; Dehumidifying Operation - arya AMALFI Serie Benutzerhandbuch

How to use the buttons

Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit starts flashing.
1. Press the MODE button to select Auto.
2. Press the UP/DOWN button to set the
desired temperature. The temperature can
be set within a range of 17 C~ 30 C in 1 C
increments.
3. Press the ON/OFFbutton to start the air
2
conditioner.
3 ON/OFF
SILENCE
FP
NOTE
1. In the Auto mode, the air conditioner can logically
TIMER
1
MODE
ON
choose the mode of Cooling, Fan, and Heating
TEMP
by sensing the difference between the actual
TIMER
FAN
ambient room temperature and the setting
OFF
temperature on the remote controller.
SLEEP FRESH
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
TURBO SELF CLEAN
LED FOLLOW ME
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
Ensure the unit is plugged in and power is
available.
1. Press the MODE button to select COOL,
HEAT(cooling & heating models only) or
FAN mode.
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature can
be set within a range of 17 C~ 30 C in 1 C
increments.
3. Press the FAN button to select the fan speed
2
in four steps- Auto, Low, Med, or High.
4. Press the ON/OFF button to start the air
4
ON/OFF SILENCE
conditioner.
FP
TIMER
1 MODE
ON NOTE
TEMP
In the FAN mode, the setting temperature is not
3 TIMER displayed in the remote controller and you are not
FAN
OFF
able to control the room temperature either. In this
case, only step 1, 3 and 4 may be performed.
SLEEP FRESH
TURBO SELF CLEAN
LED FOLLOW ME
7
7

Auto operation

O O O
Cooling /Heating/Fan operation
O O O
How to use the buttons

Dehumidifying operation

Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit starts flashing.
1. Press the MODE button to select DRY mode.
2. Press the UP/DOWN buttons to set the
3. Press the ON/OFF button to start the air
2
NOTE
3
ON/OFF
SILENCE In the Dehumidifying mode, you can not switch the
FP
fan speed. It has already been automatically controlled.
TIMER
1
MODE
ON
TEMP
TIMER
FAN
OFF
SLEEP FRESH
TURBO SELF CLEAN
LED FOLLOW ME
desired temperature. The temperature
O O
can be set within a range of 17 C~ 30 C
O
in 1 C increments.
conditioner.
8