Indicators On Lcd - arya AMALFI Serie Benutzerhandbuch

Operation of buttons
8
1 ON/OFF 9
SILENCE
FP
10
TIMER
2 MODE
ON
TEMP
3 TIMER 11
FAN
OFF
4
12
SLEEP FRESH
5
TURBO SELF CLEAN 13
LED FOLLOW ME
6
7 14
RG57A4/BGEF
8
1 ON/OFF 9
SILENCE
FP
10
2 TIMER
MODE
ON
TEMP
TIMER 11
3 FAN
OFF
4 12
SLEEP SWING DIRECT
TURBO SELF CLEAN 13
LED FOLLOW ME
6
14
7
RG57A6/BGE
12 Swing Button
(applicable to RG57A4/BGEF)
Used to stop or start vertical louver movement
and set the desired left/right air flow direction.
The vertical louver changes 6 degree in angle
for each press. For some units, the temperature ,
display area of indoor unit displays
second. If keep pushing more than 2 seconds,
the vertical louver swing feature is activated.
, And the display area of indoor unit displays
,
, flashes four times, then the tempera-
IIII
,
ture setting reverts back. If the vertical louver
swing feature is stopped, it displays LC and
remains on for 3 seconds.
Swing Button
(applicable to RG57A4/BGEF)
Used to stop or start horizontal louver move-
ment or set the desired up/down air flow
direction. The louver changes 6 degree in
angle for each press. If keep pushing more
than 2 seconds, the louver will swing up and
down automatically.
SWING Button
(applicable to RG57A6/BGE)
Used to stop or start horizontal louver auto
swing feature.
DIRECT Button
(applicable to RG57A6/BGE)
Used to change the louver movement and set
the desired up/down air flow direction.
O
The louver changes 6 in angle for each press.
13 FOLLOW ME Button
Push this button to initiate the Follow Me
feature, the remote display is actual
temperature at its location. The remote
control will send this signal to the air
conditioner every 3 minutes interval until
press the Follow Me button again. The air
conditioner will cancel the Follow Me feature
automatically if it does not receive the signal
during any 7 minutes interval.
14
LED Button
Disable/Active indoor screen Display. When
pushing the button, the indoor screen display
is cleared, press it again to light the display.
5

Indicators on LCD

Information are displayed when
the remote controller is powered
up.
,
for one
,
Mode display
AUTO COOL DRY
HEAT FAN
Displayed when data transmitted.
Displayed when remote controller is ON.
Battery display(low battery detection)
Not available for this unit
Displayed when TIMER ON time is set.
Displayed when TIMER OFF time is set.
Show set temperature or room
temperature, or time under TIMER
setting.
Displayed in Sleep Mode operation.
Indicated that the air conditioner is
operating in Follow me mode
Displayed when fresh feature is activated
(some units)
Displayed when silence feature is activated
Fan speed indication
Low speed
Medium speed
High speed
Auto fan speed
Note:
All indicators shown in the figure are for the purpose
of clear presentation. But during the actual operation
only the relative functional signs are shown on the
display window.
6