Operation Buttons - arya AMALFI Serie Benutzerhandbuch

Operation of buttons
8
3
1 ON/OFF 9
SILENCE
FP
10
TIMER
2
MODE
ON
TEMP
11
3 TIMER
FAN
OFF
4
12
SLEEP FRESH
5
13
TURBO SELF CLEAN
LED FOLLOW ME
6
7 14
RG57A4/BGEF
6
7
3
ON/OFF Button
1
This button turns the air conditioner ON
and OFF.
MODE Button
2
Press this button to modify the air conditioner
mode in a sequence of following:
AUTO COOL HEAT
DRY FAN
NOTE：Please do not select HEAT mode if the
machine you purchased is cooling only type.
Heat mode is not supported by the cooling only
appliance.
FAN Button
Used to select the fan speed in four steps:
AUTO LOW MED HIGH
NOTE: You can not switch the fan speed in
AUTO or DRY mode.
4
SLEEP Button
Active/Disable sleep function. It can
maintain the most comfortable temperature
and save energy. This function is available
on COOL, HEAT or AUTO mode only .
, , ,,
For the detail, see sleep operation in
,
,,
, ,
USER S MANUAL.
NOTE: While the unit is running under SLEEP
mode, it would be cancelled if MODE, FAN
SPEED or ON/OFF button is pressed.
5 FRESH Button
(applicable to RG57A4/BGEF)
Active/Disable FRESH function. When the
FRESH function is initiated, the Ionizer/
Plasma Dust Collector(depending on
models) is energized and will help to
remove pollen and impurities from the air.
TURBO Button
Active/Disable Turbo function. Turbo function
enables the unit to reach the preset temper-
ature at cooling or heating operation in the
shortest time(if the indoor unit does not
support this function, there is no
corresponding operation happened when
pressing this button.)
SELF CLEAN Button
(applicable to RG57A4/BGEF)
Active/Disable Self Clean function
Operation of buttons 8
9
8
1
ON/OFF 9
SILENCE
FP
10
TIMER
2
MODE
ON
TEMP
TIMER 11
3
FAN
OFF
4
12
SLEEP
SWING DIRECT
TURBO SELF CLEAN 13
LED FOLLOW ME
6
7 14
10
RG57A6/BGEF
11
UP Button( )
Push this button to increase the indoor
o
temperature setting in 1 C increments to 30 C.
DOWN Button( )
Push this button to decrease the indoor
o
temperature setting in 1 C increments to 17 C.
SILENCE/FP Button
Active/Disable SILENCE function. If pushing
,
,
more than 2 seconds, the FP function will
be activated, pushing more than 2 seconds
again to disable.
When the Silence function is activated, the
compressor will operate at low frequency
and the indoor unit will bring faint breeze,
which will reduce the noise to the lowest
level and create a quiet and comfortable room
for you. Due to low frequency operation of
compressor, it may result in insufficient
cooling and heating capacity.
,
,
The FP function can only be activated
during the heating operation(only when the
setting mode is HEAT). The unit will operate
O
at a setting temperature of 8 C.The display
, ,
window of indoor unit will display FP .Press
the buttons of ON/OFF, SLEEP, FP, MODE,
FAN SPEED, UP or DOWN while operating
, ,
will cancel the FP function.
TIMER ON Button
Press this button to initiate the auto-on
time sequence. Each press will increase
the auto-timed setting in 30 minutes
increments. When the setting time displays
10.0, each press will increase the auto-
timed setting 60 minutes increments.
To cancel the auto-timed program, simply
adjust the auto-on time to 0.0.
TIMER OFF Button
Press this button to initiate the auto-off time
sequence. Each press will increase the auto
-timed setting in 30 minutes increments.
When the setting time displays 10.0, each
press will increase the auto-timed setting
60 minutes increments. To cancel the auto-
timed program, simply adjust the auto-off
time to 0.0
4
o
o