Bosch SmartGrow 3 MSGP3 Gebrauchsanweisung Seite 17

Notes
¡ If not all deposits have dissolved, leave
the descaling solution to work for at least
2 hours and then start the pump again.
¡ If necessary, leave the descaling solution
to work in the bowl overnight.
Ordering descaling tablets
Order descaling tablets from customer ser-
vice.
Quantity
6 x 18 g
12 x 18 g
Accessories
Accessory
Height module
Boosting light
module
Blooming light
module
Troubleshooting
Pump starts 1 to 7 times a day.
Normal watering cycle
Your device automatically performs op-
▶
timum watering.
Pump makes loud or unusual noises
compared with normal watering.
Too little nutrient solution in the water bowl.
Pour nutrient solution into the water
▶
bowl.
→ "Topping up with nutrient solution",
Page 16
Order number
311864
311893
Designation
MSGZHB1
MSGZHB2
MSGZHB3
Cleaning the device
After descaling, clean all parts thoroughly.
→ Fig.
23
Notes
¡ Clean all parts as indicated in the clean-
ing overview.
¡ After drying re-assemble all parts in re-
verse order.
Assembling the watering unit
→ Fig.
25
Overview of cleaning
→ Fig.
27
Use
Insert another height module when the plants have
almost reached the light unit. You can insert up to
4 height modules.
For an additional portion of light. This way, your
plants grow faster and can be harvested earlier.
Tip: For perfect results, up to two boosting or
blooming light modules can be used alternately to
match the height modules.
The special light for blooming. For maximum
blooming and richer harvesting.
Tip: For perfect results, up to two boosting or
blooming light modules can be used alternately to
match the height modules.
Pump is blocked or furred up.
Descale and clean the pump.
▶
→ "Descaling the appliance", Page 16
→ "Cleaning the device", Page 17
Light unit does not light up.
Device is not connected to the power
supply.
Check whether the power supply is
1.
plugged into a socket.
Check whether the connecting cable is
2.
properly connected to the pump.
Cleaning the device en
-
24
-
26
17