Herunterladen Diese Seite drucken
Jamara Digi Control Iron Gebrauchsanleitung

Jamara Digi Control Iron Gebrauchsanleitung

Folienbügeleisen

Werbung

No. 172130 - Digi Control Iron
No. 172140 - Pro Control Iron
DE - Gebrauchsanleitung
GB - Instruction
FR - Notice
IT - Istruzione
ES - Instrucción
DE - Allgemeine Hinweise
JAMARA e.K. übernimmt keine Haftung für Schäden, die an dem Produkt selbst oder durch dieses
entstehen, sofern diese auf falsche Bedienung oder Handhabungsfehler zurückzuführen sind. Der
Kunde allein trägt die volle Verantwortung für die richtige Bedienung und Handhabung; dies umfasst
insbesondere die Montage, den Ladevorgang, die Verwendung bis hin zur Wahl des Einsatzberei-
ches. Bitte beachten Sie hierzu die Bedienungs- und Gebrauchsanleitung, diese enthält wichtige
Informationen und Warnhinweise.
GB - General information
JAMARA e.K. is not liable for any damage caused to the product itself or through this, provided this
is due to improper operation or handling errors. The Customer alone bears the full responsibility for
the proper use and handling, including without limitation, the assembly, the charging process, the
use and choice of the operation area. Please refer to the operating and user instructions, it contains
important information and warnings.
FR - Remarques générales
La société JAMARA e.K. n'est pas responsable de dommages, que ce soit au niveau du modèle
ou causé par celui-ci, résultant d'une utilisation non appropriée. Seul le client est responsable con-
cernant la mise en oeuvre et l'utilisation conforme du matériel; cela va de l'assemblage, en passant
par la charge des accus et allant jusqu'au domaine d'utilisation. Pour cela, veillez lire attentivement
la notice d'assemblage et d'utilisation, celle-ci contient d'importantes informations ainsi que les con-
signes de sécurités.
IT - Informazioni generali
JAMARA e.K. non e´responsabile per danni, sostenute al prodotto stesso o attraverso questo, do-
vuti ad una gestione non corretta del articolo. Solo il cliente si assume la piena responsabilità per
la manutenzione e l´utilizzo corretto dello stesso; questo include il montaggio, la ricarica, l´utilizzo,
fino alla scelta della aerea di applicazione. Si prega di notare e rispettare le istruzioni d´uso, questi
contengono informazioni e avvertimenti molto importanti.
ES - Información general
JAMARA e.K. no se hace responsable de los daños causados al producto en sí o por medio de
esto, a menos que esto se debe al mal funcionamiento o errores de manejo. El cliente solo tiene la
responsabilidad completa para el uso y manejo adecuado, incluyendo, sin limitaciones, el montaje,
el proceso de carga, el uso de hasta la elección de la zona de aplicación. Por favor, consulte las
instrucciones de uso y funcionamiento, contiene información y avisos importantes.
DE - Konformitätserklärung
Hiermit erklärt JAMARA e.K., dass die Produkte‚ „Folienbügeleisen Digi Control Iron, No.
172130, Folienbügeleisen Pro Control Iron, No. 172140" den Richtlinien 2014/30/EU,
2011/65/EU und 2014/35/EU entspricht.
Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse
verfügbar: www.jamara-shop.com/Konformitaet
GB - Certificate of Conformity
Hereby JAMARA e.K. declares that the products „Heat sealing iron Digi Control Iron,
No.172130, Pro Control Iron, No. 172140" complies with Directive 2014/30/EU,
2011/65/EU and 2014/35/EU.
The full text of the EU Declaration of Conformity is available at the following Internet address:
www.jamara-shop.com/Conformity
FR - Déclaration de conformité
Par la présente, JAMARA e.K. déclare que les produits „Fer à entoiler Digi Control Iron,
No.172130, Pro Control Iron, No. 172140" sont conformes aux Directives 2014/30/UE,
2014/35/UE et 2011/65/UE.
Le texte intégral de la déclaration de conformité CE est disponible via l'adresse suivante
Adresse Internet disponible: www.jamara-shop.com/Conformity
IT - Dichiarazione di conformità
Con la presente JAMARA e.K. dichiara che i prodotti „Ferro da stiro Digi Control Iron,
No.172130, Pro Control Iron, No. 172140" sono conformi alle Direttive 2014/30/UE,
2014/35/UE e 2011/65/UE.
Il testo integrale della dichiarazione di conformità UE è disponibile al seguente indirizzo
Internet: www.jamara-shop.com/Conformity
ES - Declaración de conformidad
Por la presente JAMARA e.K. declara que los productos „Plancha para entelar Digi Control
Iron, No.172130, Pro Control Iron, No. 172140" cumplen con las Directivas 2014/30/UE,
2014/35/UE y 2011/65/UE.
El texto completo de la declaración de conformidad de la UE está disponible en la siguiente
dirección de Internet: www.jamara-shop.com/Conformity
DE - Bitte lesen Sie die komplette Bedienungsanleitung und Sicherheitshinweise
sorgfältig durch bevor Sie das Modell in Betrieb nehmen.
Achtung! Warnhinweise / Sicherheitshinweise unbedingt komplett lesen.
Diese dienen Ihrer Sicherheit und können Unfälle / Verletzungen vermeiden.
GB - Read the complete instructions and security instructions carefully before using the
model.
Caution! Please fully and carefully read warnings/ safety instructions.
These are for our own security and can avoid accidents/injuries.
FR - Veuillez lire attentivement et entièrement la notice et les consignes de sécurités
avant tout utilisation de ce produit!
Attention! La mise en garde et les consignes de sécurités sont à lire
entièrement pour votre sécurité et éviter tout accidents et blessures.
IT
- Vi preghiamo di leggere attentamente la istruzione completa e Istruzioni per la
sicurezza prima di usare il modello.
Attenzione! Leggere completamente le avvertenze / istruzioni di sicurezza,
questi sono per la vostra sicurezza può prevenire incidenti / infortuni.
ES - Lea atentamente la instruccion completa y seguridad antes de poner el modelo
en funcionamiento
Atención! Leer completamente las notas de advertencia / instrucciones de
seguridad estos son para su seguridad y puede evitar accidentes / lesiones
Folienbügeleisen
Heat sealing iron
CZ - Návod k použití
PL - Instrukcja użytkowania
NL - Gebruiksaanwijzing
SK - Návod na použitie
CZ - Vyloučení odpovědnosti
Firma JAMARA e.K. nenese žádnou odpovědnost za škody, které vzniknou na výrobku nebo jeho
prostřednictvím, pokud tyto škody vzniknou nesprávnou obsluhou nebo nesprávným používáním
výrobku. Odpovědnost za správnou obsluhu a správné používání výrobku nese výhradně zákazník.
Toto se týká hlavně montáže, procesu nabíjení, používání až k výběru oblasti použití. Za tímto
účelem se prosím seznamte s návodem na použití, který obsahuje důležité informace a upozornění.
ile uyarıları içeren kullanım ve işletme kılavuzunu dikkatlice okuyunuz.
PL - Wykluczenie odpowiedzialności
Firma JAMARA e.K. nie ponosi żadnej odpowiedzialności za szkody powstałe na samym produkcie
bądź za jego pośrednictwem jeżeli szkody te wynikają z nieprawidłowej obsługi bądź z niepoprawn-
ego posługiwania się produktem. Wyłącznie klient ponosi całkowitą odpowiedzialność za poprawną
obsługę i poprawne posługiwanie się produktem: obejmuje to w szczególności montaż, proces
ładowania, użytkowanie aż po wybór obszaru zastosowania. Prosimy zapoznać się w tym celu z
instrukcją obsługi i użytkowania, która zawiera ważne informacje oraz wskazówki ostrzegawcze.
NL - Uitsluiting van de aansprakelijkheid
De firma JAMARA e.K. is niet aansprakelijk voor schade ontstaan aan het product zelf of door ge-
bruik ervan indien deze schade voortvloeit van onjuiste bediening of foutief gebruik van het product.
De klant zelf is uitsluitend aansprakelijk voor de correcte bediening en juist gebruik van het product:
het omvat met name de montage, het ladingproces, het gebruik en de keuze van het toepassings-
gebied. Wij vragen gaarne kennis te nemen van de bedienings- en gebruiksaanwijzing die cruciale
gegevens en waarschuwing omvat.
SK - Vylúčenie zodpovednosti
Firma JAMARA e.K. nenesie žiadnu zodpovednosť za škody, ktoré vzniknú na výrobku alebo jeho
prostredníctvom, pokiaľ tieto škody vzniknú nesprávnou obsluhou alebo nesprávnym používaním
výrobku. Zodpovednosť za správnu obsluhu a správne používanie výrobku nesie výhradne zákaz-
ník. Toto sa týka hlavne montáže, procesu nabíjania, používania až k výberu oblasti použitia. Za
týmto účelom sa prosím zoznámte s návodom na použitie, ktorý obsahuje dôležité informácie a
upozornenia.
CZ - Prohlášení o shodě
Společnost JAMARA e.K. tímto prohlašuje, že produkty „Tepelná těsnicí žehlička Digi
Control Iron, No.172130, Pro Control Iron, No. 172140" odpovídají směrnicím 2014/30/EU,
2014/35/EU a 2011/65/EU a 2009/48/ES.
Úplné znění EU prohlášení o shodě je k dispozici na následující internetové adrese:
www.jamara-shop.com/Conformity
PL - Deklaracja zgodności
Niniejszym firma JAMARA e.K. oświadcza, że produkty‚ "Żelazko do zgrzewania Digi
Control Iron, No.172130, Pro Control Iron, No. 172140" jest zgodny z dyrektywami
2014/30/UE, 2014/35/UE oraz 2011/65/UE.
Pełny tekst deklaracji zgodności UE jest dostępny pod następującym adresem
internetowym: www.jamara-shop.com/Conformity
NL - Conformiteitsverklaring
De firma JAMARA e.K. verklaart hiermee dat het Product‚ „Hitteverzegeling Digi Control Iron,
No.172130, Pro Control Iron, No. 172140" aan de richtlijnen 2014/30/EU, 2014/35/EU a
2011/65/EU voldoen.
De volledige tekst van de EU-conformiteitsverklaring is beschikbaar op het volgende
internetadres: www.jamara-shop.com/Conformity
SK - Vyhlásenie o zhode
Týmto firma JAMARA e.K. vyhlasuje, že Produkt „Tepelná tesniaca žehlička Digi Control
Iron, No.172130, Pro Control Iron, No. 172140" je v súlade so smernicami 2014/30/EU,
2014/35/EU a 2011/65/EU.
Úplné znenie vyhlásenia o zhode EÚ je dostupné na nasledovnej internetovej adrese:
www.jamara-shop.com/Conformity
CZ - Před použitím tohoto modelu si pečlivě přečtěte návod k použití a bezpečnostní
upozornění.
Upozornění! Varování / bezpečnostní pokyny musí být přečteny v plném
rozsahu! Slouží vaší bezpečnosti a mohou zabránit nehodám / zraněním.
PL - Przed uruchomieniem modelu prosimy o staranne przeczytanie całej instrukcji
obsługi i informacji dotyczących bezpieczeństwa.
Uwaga! Ostrzeżenia / instrukcje bezpieczeństwa muszą zostać przeczytane w
całości! Służą one Państwa bezpieczeństwu i mogą zapobiec wypadkom /
urazom.
NL - Lees de volledige instructies en veiligingheidsinstructies zorgvuldig door voordat u
het model in gebruik neemt.
Let op! Waarschuwingen/veiligheidsinstructie moeten volledig worden
gelezen! Ze zorgen voor uw veiligheid en kunnen ongevallen/letsels
voorkomen.
SK - Pred uvedením modelu do prevádzky si prosím pozorne prečítajte celý návod na
použitie a bezpečnostné informácie.
Upozornenie! Varovania/bezpečnostné pokyny sa musia prečítať v celom
rozsahu! Slúžia na Vašu bezpečnosť a môžu zabrániť nehodám / zraneniam.
44/22

Werbung

loading

Inhaltszusammenfassung für Jamara Digi Control Iron

  • Seite 1 GB - General information PL - Wykluczenie odpowiedzialności JAMARA e.K. is not liable for any damage caused to the product itself or through this, provided this Firma JAMARA e.K. nie ponosi żadnej odpowiedzialności za szkody powstałe na samym produkcie is due to improper operation or handling errors. The Customer alone bears the full responsibility for bądź...
  • Seite 2 DE - Folienbügeleisen in Betrieb nehmen IT - Usando il ferro PL - Korzystanie z żelazka ● Um die Teflonbeschichtung und das verwendete Bügel- ● Assicurati di nuovo che il calzino di ferro sia stato inserito ● Upewnij się ponownie, czy żelazna skarpeta została włożona material zu schützen, Streifen Sie die Bügelsocke über den nella scarpa prima dell‘uso.
  • Seite 3 DE - Temperatureinstellungen IT - Impostazioni di temperatura PL - Ustawienia temperatury Beachten Sie bitte die Temperaturempfehlungen Ihres Folien- Fare riferimento alla temperatura consigliata dal produttore della Proszę odnieść się do temperatury zalecanej przez producenta herstellers. Sollte der Hersteller keine Empfehlungen für den pellicola.
  • Seite 4 CH - Modellbau Zentral, Peter Hofer, Bresteneggstrasse 2, CH-6460 Altdorf, Tel +41 79 429 62 25, Mobil +41 41 870 02 13, info@modellbau-zentral.ch, www.modellbau-zentral.ch CZ - PenTec s.r.o., Distributor Jamara for Czech Republic and Slovakia, Veleslavínská 30/19, CZ-162 00 Praha 6, Tel +420 235 364 664, Mobil +420 739 075 380, servis@topdrony.cz, www.topdrony.cz SI - Janus Trade D.O.O., Distributor Jamara for Slovenia, Koroška cesta 53c, SI-4000 Kranj, info@janustrade.si, www.janustrade.si...

Diese Anleitung auch für:

172130Pro control iron172140