Inhaltsverzeichnis
Werbung
Figure 3
1
4
USE INSTRUCATIONS
1. Install the POD
Install the POD onto the battery at the correct place. Make
sure they are firmly connected.
* Refer to the figure 1 above.
2. Replace the Coil
- Take out the POD from the battery;
- Pull out the used coil from the POD;
- Install a new coil to the POD;
- Reattach the POD into place.
* Refer to the figure:2 above.
3. Fill E-liquid
- Twist the top cap according to the arrow direction until
the refilling port show out;
- Pull out the silicone plug and fill e-liquid through the hole,
then twist the top cap in place after filling is finished.
- Please wait 5 minutes for the e-liquid to soak into the coil
completely.
* Refer to the figure 3 above.
4. Adjust the Airflow
To adjust the airflow volume, please rotate the top cap on
the POD.
2
5
3
ENGLISH
3
Werbung
Inhaltsverzeichnis
