Get Started; Power Off - defunc TRUE TALK Bedienungsanleitung

GET STARTED

1. Make sure the earbuds are fully charged. Do this by charging the
charging case with the earbuds in until the 4 white lights on the
charging case are lit.
2. Open the charging case, take out the earbuds. The earbuds will
automatically power on and pair with each other.
3. When white and red lights on either earbud flashes alternately,
the earbuds are ready to pair with your device.
4. Turn on the Bluetooth function on your device and select
Defunc TRUE TALK in the list to pair earbuds with the device.
POWER ON
There are two ways to turn the earbuds on:
1. Remove the earbuds from the charging case for auto-power on.
2. Press the touch area for 3 seconds.

POWER OFF

There are three ways to turn the earbuds off:
1. Put the earbuds back in the charging case and close the cap.
2. Press the touch area for 5 seconds.
3. The earbuds turn off after 5 minutes if not active.
TRUE_TALK_MANUAL_100x100.indd 7 TRUE_TALK_MANUAL_100x100.indd 7
7
2021-12-03 11:45 2021-12-03 11:45