Clearaudio concept Bedienungsanleitung Seite 8

User manual / Bedienungsanleitung
4.4 Fine speed adjustment
As the motor adjustment is already pre-set at the factory, there is no need to check the speed before
using the turntable for the first time.
To adjust the speed as perfectly and precisely as possible, we recommend the Clearaudio
Stroboscope Testrecord (Art. No. AC038) and the Clearaudio "Speed Light"
(Art. No. AC039, both available at www.analogshop.de).
On the rear side of your turntable (close to the power supply input) there are three speed setting
controls:
- Left control = setting 78rpm
- Middle control = setting 45rpm
- Right control = setting 33 1/3rpm
(near power supply jack)
Page / Seite 8
Pic. 11: Speed setting controls on the rear
© clearaudio electronic GmbH