Cleaning And Maintenance; Technical Specifications - Eurolite Rubberlight Rl2-230 Bedienungsanleitung

The minimum bending radius is 3 cm.
The tube must never be shortened.
How to connect the tube to the power supply:
Connect the device to the mains with the power-plug. Make sure that the outlet is in a dry area.
After the installation, the power supply cable, the plug and the connector must be free of any tractive forces
and rotary forces.
The lighting chain must never be covered with any object.
OPERATION
After you connected the lighting chain to the mains, the lamps start burning.
Via the integrated controller, you can choose among eight different programs using the Press-button.

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
There are no serviceable parts inside the device. If defective, please dispose of the unusable lighting chain
in accordance with the current legal regulations.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Lamps/tube:
Lamp-distance:
Tube-diameter:
Power supply cable controller:
Connection cable controller-tube:
Weight:
Accessory:
RUBBERLIGHT mounting-clip, 50 pieces
Self-adhesive mounting with tie-strap
Installation-channel for RUBBERLIGHT
Please note: Every information is subject to change without prior notice. 02/01 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
230 V/50 Hz
260 W
370
27 mm
13 mm
2 m
2 m
2.3 kg
No. 50510100
No. 50510150
No. 50510170
8