PERFECTPRO SOLOWORKER Bedienungsanleitung Seite 17

Playing a previously-paired Bluetooth source device
The radio can memorize up to 6 sets of paired Bluetooth source
devices, when the memory exceeds this amount, the earliest paring
device will be over written from the device.
If your Bluetooth source device already paired with the radio
previously, the unit will memorize your Bluetooth source device and
it attempts to reconnect with a Bluetooth source device in memory
which is last connected.
Disconnecting your Bluetooth device
Press and hold the Bluetooth pairing button for 2-3 seconds to
disconnect with your Bluetooth device. You can also press the
Source button to select any mode other than Bluetooth mode or turn
off Bluetooth on your Bluetooth device to disable the connection.
If you disconnect the Bluetooth device in Bluetooth mode, the
"Bluetooth Pairing" will show on the display, indicating the Bluetooth
is available again for pairing.
True wireless stereo (TWS) function
True wireless stereo (also known as TWS) is a feature that allows
one device to wirelessly connect with another device. You can use
the TWS function to connect it to a second SOLOWORKER (SW3)
and play your music through two speakers at once.
Set up the first speaker
1. Make sure the first speaker is in Bluetooth mode and connect to a
Bluetooth device.
2. Press and hold the Menu button to enter the Bluetooth menu.
3.
Press the Tuning up / down button to select the "Stereo Pairing".
4. Press the Select button to enter the stereo pairing mode.
Set up the second speaker
1. Make sure the second speaker is in Bluetooth mode (not
connected to a Bluetooth device).
2. Press and hold the Menu button to enter the Bluetooth menu.
3.
Press the Tuning up / down button to select the "Stereo Pairing".
GB
NL
D
F
16