Sthor 78127 Bedienungsanleitung Seite 14

TOOL CHARACTERISTICS
Mini Battery Grinder is designed for a variety of household tasks such as drilling, grinding, milling, engraving, polishing, cleaning
and much more. Thanks to high rotational speed, only now it is possible to carry out many works which until today were impossible
to do. Small size provides comfortable work. Appliance has been designed to be used only in households and may not be used
as a professional tool, i.e.in industrial plants and for economic activity. Correct, reliable and safe operation of the product depends
on proper operation, therefore:
Before starting the work with this tool, please read this manual and keep it properly.
Note! Dust generated when grinding some surfaces, can be harmful to health or toxic.
The above remark concerns, among others grinding of surfaces coated with paints containing lead, some types of wood, some
metals (e.g. lead) and materials, so while working you should use an eff ective dust extraction system, dust masks and other skin
and respiratory protection measures. The supplier does not assume any liability for damages resulting from failure to follow safety
regulations and recommendations specifi ed in this manual.
PRODUCT ACCESSORIES
The product is delivered complete and does not require assembly. The product is supplied together with: battery and docking
station (charger).
Note! Product with a catalogue number: 78128 has not been equipped with battery and docking station.
TECHNICAL PARAMETERS
Parameter
Catalogue number
Rated voltage
Tool chuck diameter
Maximum diameter of accessories
Rated rpm
Noise level
- acoustic pressure
- power
Vibration level
Protection class
Weight
Battery type
Battery capacity*
Charger*
Input voltage:
Mains frequency
Rated current:
Output voltage:
Output current:
Charging time**
* only in models equipped with battery and charger
** specifi ed charge time refers only to battery of capacity mentioned in the table
GENERAL SAFETY CONDITIONS
NOTE! Get acquainted with all the instructions below. Failure to observe them may lead to an electric shock, fi re or injuries. The
notion of electric tool used in the instructions applies to all the tools which are powered with electric current, both wire tools and
wireless ones.
OBSERVE THE FOLLOWING INSTRUCTIONS
Place of work
The place of work must be properly illuminated and clean. Disorder and poor illumination may be a cause of accidents. Do not
work with electric tools in explosive environments, or those which contain infl ammable liquids, gases or vapours. Elec-
O R I G I N A L
14
GB
Measuring unit
[V]
[mm]
[mm]
[min -1 ]
[dB(A)]
[dB(A)]
[m/s 2 ]
[kg]
[Ah]
[V~]
[Hz]
[A]
[V]
[A]
[h]
I N S T R U C T I O N S
Value
78127, 78128
12 DC
3.2
24
5,000 – 25,000
70.9±3.0
81.9±3.0
34.25±1.5
IPX0
0.22
Li-Ion
1.5
100-240
50/60
1.0
13,5 DC
1.8
1