For Your Safety - Spit 372 Bedienungs- Und Wartungsanleitung

For your safety

Non-observance of the safety instructions
and the prescriptions regarding the preven-
tion of accidents will occur the risk of injury!
See enclosure for further safety instructions!
Please observe the general drawing and explanations on the inner
cover!
I This machine can be operated safely only when the operat-
ing instructions have been completely read and strictly
observed to. It is recommended to receive practical
instruction before using the machine for the first time.
I Always inspect cable and plug before using the machine. Have
damage repaired only by a qualified professional.
I In order to avoid any risks, the connecting cable – if damaged –
has to be replaced by the manufacturer or his agency.
I Insert plug in power supply socket only when machine is switched
off.
I The tool is provided with a torque limiter which protects the oper-
ator if the drill bit gets stuck. This torque is however controlled only
if the user is holding the tool firmly with both hands and is
in a stable position (e.g. not on a ladder).
I The machine must not be used when damp and must not be
operated in wet environment.
I Never use the machine without the auxiliary handle (6).
I Do not touch rotating tools.
I Use safety glasses, ear protectors, dust protection mask as well
as wear protective gloves and safety shoes.
I Beware of electric lines, gas and water pipes embedded in walls.
I Use only genuine accessories.
GB
7