AZURO BP-50HS-A Installations- Und Bedienungsanleitung Seite 22

3. Pairing the heat pump
It is necessary to pair your new heat pump to your smart phone, then you can control
the heat pump through your smart phone.
Please make sure your smart phone is connected with your Wi-Fi router, and the Wi-Fi
signal can be receipted by the heat pump clearly.
1) Power on the heat pump. Then press and hold the two buttons simultaneously on
the wire controller which marked red in below picture for 3 seconds. Then the
"Communication Symbol" in the wire controller screen will flash.
2) Then return to the APP on your smart phone. Press "Add Device" or "+" first. Then
the device will show automatically. Press "Go to add", choose the right Wi-Fi and input
password, then it will start to pairing.
22