Mounting The Docking Station - Falcon Rural 4G Internet Solution Benutzerhandbuch

7

MOUNTING THE DOCKING STATION

Fix the 4G docking station with the 2 small screws.
If connecting to 12V, Use the 12 volt power cable that comes with the
4G docking station to connect to a 12v power source. If connecting to
a 240v power source, use the 3 pin power adapter. Plug the power plug
into the 4G docking station
MOUNT THE FALCON 4G ROUTER TO THE DOCKING STATION
Mount the Falcon 4G router on the Magnet on the 4G docking station.
Plug in the USB power cable from the docking station into the router.
Note if the USB does not fit rotate 180 degrees as the plug and the socket
has to be matched the correct way.
Plug the antenna cable to the antenna input on the router user the left
hand side input as indicated in the diagram.
Turn on the power on the 4G docking station, the light on the switch
should illuminate to confirm power on.
Turn on the Falcon 4G router by pressing and holding the power button
the router.