Mounting Requirements And Selecting Location; Prepare And Drill Holes - Falcon Rural 4G Internet Solution Benutzerhandbuch

5

MOUNTING REQUIREMENTS AND SELECTING LOCATION

Find a suitable position for application of the mounting pole or wall
bracket. Ensure that the pole is positioned as high as possible and where
there are no obstacles to obstruct the signal to the antenna.
Requirements:
Drill
Hammer
Masonry Drill-bit 7mm for expansion bolts.
10mm Drill-bit for cable entry hole
Sealant for cable entry hole.
Pencil / pen for marking pole bracket holes.

PREPARE AND DRILL HOLES

Once the position has been decided use the pole bracket to mark the 4
drill holes for the bolts and also mark a central hole for the cable entry.
Once the drill holes have been marked, use a 7mm drill-bit to drill the
holes for the for the expansion bolts and a 10mm masonry bit to drill the
cable entry hole.
Normal masonry wall plugs and screws or another alternative can be
used ( not supplied ) depending on application. Once all holes are drilled,
use a hammer to knock the expansion bolts into the holes ready for
applying the bracket.