Introduction - Kingston Technology IronKey Keypad 200 Anleitung

KEYPAD 200

Introduction

Note: The KP200 rechargeable battery is not fully charged, we recommend the battery be charged prior to
first use. Please plug in the KP200 to a powered USB port for 30-60 minutes to fully charge the battery.
Thank you for purchasing the IronKey KP200, an ultra-secure and easy to use, hardware encrypted
USB 3.2 Gen 1 PIN activated flash drive.
The KP200 is designed to be FIPS 140-3 Level 3 (certification pending). This is a high-level US government
accreditation and means the product has passed numerous tests relating to the encryption algorithm and
tamper-evidence as well as to thwart attacks directed at the Critical Security Parameters.
The KP200 uses military grade AES-XTS 256-bit hardware encryption, which encrypts all data stored on the
drive in real-time. The KP200 requires no software and is OS and host independent.
The KP200 incorporates a rechargeable battery allowing the user to enter a 8-15 digit PIN (Personal
Identification Number) onto the on-board keypad before connecting the drive to a USB port.
Should the drive be lost or stolen, the user can rest assured that all data held on the KP200 is safe and
cannot be accessed by any unauthorized person.
The KP200 can be configured with both a User and Admin PIN, making it perfect for corporate and
government deployment. As the KP200 is unlocked via the onboard keypad and not a host computer, it is
not vulnerable to software/hardware based keyloggers or brute force attacks.
#4
www.kingston.com