Kingston Technology IronKey Keypad 200 Anleitung Seite 22

To create a Admin PIN after a Brute Force attack or Reset, proceed with the following steps.
Instructions
1. Press KEY button once
2. Press and hold down the number 1 button
and press the KEY button twice (double click)
(1 & )
3. Enter your new 8-15 digit Admin PIN
4. Press KEY button twice (double-click)
5. Re-enter your new Admin PIN
6. Press KEY button twice (double-click)
LED LED State
Red,
once and then switch to a solid
and a blinking
Solid
switch to flickering
Red
Flickering
a blinking
Green
Blinking
Red
Green
was successfully created
www.kingston.com
Green & Blue LEDs will flash together
Green LED
Red LED and blinking Green
Red and
and Blue LEDs will continue to flicker
Red and Blue LEDs will switch to
Green LED
LED continues to blink
Green LED will change to solid
LED and then switch to a flickering
LED indicating that the Admin PIN
Red LED
LED will
Blue LEDs
#21