Initial Setup; Adjusting The Volume; Dab Radio Mode - Sharp Tokyo DR-430 Bedienungsanleitung

the available menu options or preset
locations
• Short press: Select a displayed radio station/
frequency, menu or preset option
• When alarm is sounding in standby, short
press: activates a 10-minute snooze.
10. Telescopic aerial
11. Power input
Box contents
1 x DR-430 Tokyo Digital Radio
Power adaptor
User documentation
Using your DAB+/FM radio
Telescopic aerial
Fully extend the telescopic aerial (preferably
vertically) before you attempt to tune to a DAB
/ FM station. This will ensure that the maximum
signal strength is available when the radio begins
to scan. Extending the aerial also ensures the best
possible sound quality.
Connection
Note: Your radio has been supplied with a
power adaptor. Please check and ensure that
you connect the correct 3 pin or 2 pin part to the
power adapter that is appropriate for the country
where the product will be used.
Connect the adapter lead to the power input
or power socket on the back of the radio and
plug the power adaptor into the wall socket and
switch on. The radio will power on and display
<SHARP sharpconsumer.eu>. It will then go into
standby mode.
Initial set-up
Short press to switch on the radio. It
will begin an automatic scan for DAB stations.
A progress bar will show the progress of the
scan and the number of stations found. When
the scan is complete, your radio will select the
first available station and begin to play. By
default, stations are listed numerically and then
alphabetically.
Note: The DAB radio station list is stored in the
memory; the next time the radio is switched on,
the station search does not take place.
Short press or
available stations. To select the station displayed,
short press . There will be a short delay whilst
your radio tunes to your selected station.

Adjusting the volume

Turn clockwise to increase the volume,
and anti-clockwise to decrease the volume.
Time and date
Time and date will be synchronised automatically
to that broadcast by the DAB service in 24-hour
format.
To set the time and date manually, turn on the
radio. Long press
Use to select <System> / <Time> / <Set
Time/Date>. <Set time> is displayed and the
hour digits will flash; use
and minutes. <Set date> is displayed and the
day will flash; use
year. <Time Saved> is shown once the year is
confirmed and you will return to the <Set Time/
Date> menu.
Use
to change the clock/date format
and auto update settings. Short press to exit
the menu.
Change the mode
Short press to change between DAB, FM,
and Bluetooth modes. The display screen will
confirm the mode.

DAB radio mode

Select DAB radio mode
Short press until the screen displays
<DAB+>. The first time you use the radio or if the
station list is empty, your radio will automatically
begin to scan for DAB radio stations. A progress
bar will show the progress of the scan and the
number of stations found during the scan will also
be displayed. If you were listening to a DAB station
when you switched the radio off, this station will
automatically be selected when you switch the
radio back on.
to scroll through the
to enter the menu options.
to set hours
to set day, month and
EN