Assembly; Installing The Handle - Dolmar MS290.4U Originalbetriebsanleitung

MS290.4LN
9
1 Spark plug cover
5 Lock-off lever
9 Handle
13 Fuel tank
17 Shoulder harness (coun-
try specific)
NOTE: The type of cutting tool varies depending on the country.

ASSEMBLY

CAUTION:
Before doing any work on the
Petrol Brushcutter, always stop the engine and
pull the spark plug connector off the spark plug.
CAUTION:
Start the Petrol Brushcutter only
after assembling it completely.

Installing the handle

For bike handle model only
Insert the shaft of the handle into the grip. Align the
screw hole in the grip with the one in the shaft. Tighten
the screw securely.
1
5
6
4
8
7
10
2 Air cleaner cover
6 Hanger
10 Protector (narrow)
14 Starter handle
- -
2
3 11
12
13
17
3 Primer pump
7 Throttle trigger adjust-
ment dial
11 Choke lever
15 Muffler
- -
2
► 1 . Grip 2. Screw 3. Handle 4. Throttle cable
8 ENGLISH
14
4 Stop button
8 Throttle trigger
12 Fuel tank cap
16 Oil tank cap
- -
1
4
3
15
16