Safety Instructions - Clever Clean 3144 Gebrauchsanleitung

SAFETY INSTRUCTIONS

Be sure to read all safety information and instructions listed here carefully. Failure to
comply with these notices and instructions may result in electric shock, fire and/or
injury.
• Keep packaging materials away from children and pets. There is a danger of suffocation!
• Before switching on the appliance, check that the voltage available in your home matches the
voltage indicated on the appliance.
• To avoid the risk of electric shock, do not immerse the unit in water or use it in a humid environment.
• Always check the device for damage before operating it. If the device shows visible damage, it must
not be used.
• Do not attempt to repair the device yourself if a malfunction occurs, always take it to an authorised
service centre.
• Do not use the device if it has malfunctioned or fallen into water.
• Never touch the power cord or plug with wet hands.
• Do not insert metal objects into the unit to avoid electric shock.
• Do not use the device if flammable gases are present in the air.
• Keep a sufficient distance to heat sources such as stove tops or ovens.
• Always place the appliance on a dry and level surface.
• Hold the power cord by the plug when plugging in or unplugging it; never pull on the cord.
• Do not connect the appliance to an extension cord or multi-outlet adapter.
Always connect the appliance to the mains socket to avoid short circuits and sparking.
• Always use your product with the same voltage as specified in the operating instructions and on the
product itself.
• Always unplug the appliance from the power outlet when it is not in use for a long period of time.
• Switch off the appliance and disconnect the mains plug before carrying out any care or
maintenance work.
• In case of foam formation or liquid leakage, switch off the device immediately or pull out the
mains plug!
• Make sure that the top part is properly seated on the housing and firmly closed before switching
on the device.
14
Item Number: 3144
QUICK GUIDE
Open the locking hooks on both sides of the
collecting tray and pull the handle to remove
the top part
Close the anther tightly
Place the upper part on the collection container
and lock both locking hooks
Insert the hose into the suction opening
and lock it
Combine the desired accessories
Operate toggle switch
15