MD200/MD201 Einbau/Installation
Anschluss/Connection
Stecken Sie den Stecker Ihres Handschalters in die Buchse des
, ziehen Sie das Kabel des Handschalters durch die
MD200/MD201
Zugentlastung.
Connect the hand-control plug into the socket of the
, pull the hand-control cable through the strain-
MD200/MD201
relief.
Stecken Sie jetzt den Netzstecker in die Steckdose, Ihr System ist
betriebsbereit.
Now connect the main plug into the wall outlet. Your system is
ready to operate.
-3-