Settings Menu Contents - Hitachi 43hk6500 Bedienungsanleitung

Settings Menu Contents

Picture Menu Contents
You can change the picture mode to suit your preference or requirements. Picture mode can
be set to one of these options: Cinema, Game(optional), Sports, Dynamic and Natural.
Mode
Dolby Vision Modes: If Dolby Vision content is detected Dolby Vision Dark and Dolby Vision Bright picture
mode options will be available instead of Cinema and Natural modes.
Contrast Adjusts the light and dark values on the screen.
Brightness Adjusts the brightness values on the screen.
Sharpness Sets the sharpness value for the objects displayed on the screen.
Colour Sets the colour value, adjusting the colours.
For setting the Energy Saving to Custom, Minimum, Medium, Screen Off or Off.
Energy Saving
Note: Available options may differ depending on the selected Mode.
This setting controls the OLED luminance level. This function will be inactive if the
OLED Luminance
Energy Saving is set to an option other than Custom.
Advanced Settings
Dynamic
You can change the dynamic contrast ratio to desired value.
Contrast
If the signal is weak and the picture is noisy, use the Noise Reduction setting to reduce
Noise Reduction
the amount of noise.
Sets the desired colour temperature value. Cool, Normal, Warm and Custom options
Colour Temp
are available.
If the Colour Temp option is set as Custom, this setting will be available. Increase the
White Point
'warmth' or 'coolness' of the picture by pressing Left or Right buttons.
You can perform this panel maintenance operation manually to protect the OLED panel
OLED Fast Panel and extend its life time. This operation will take about 10 minutes and then the TV will be
switched off automatically. Do not unplug the mains lead during this period. Refer to the
Clean
OLED TV Operations section for more information before you perform this operation.
You can perform this panel maintenance operation manually to protect the OLED panel
and extend its life time. This operation will take about 1 hour and then the TV will be
OLED Panel
switched off automatically. Do not unplug the mains lead during this period. It is not
Noise Clean recommended to perform this operation more than once a year or unless requested
by authorised service personnel. Refer to the OLED TV Operations section for more
information before you perform this operation.
Picture Zoom
Sets the desired image size format.
This option may be available depending on the Picture Zoom setting. Highlight and
Picture Shift
press OK, then use directional buttons to shift the picture upwards or downwards.
Press left/right buttons to set Movie Sense to Low, Medium, High or Off. While Movie
Movie Sense Sense is active, it will optimize the TV's video settings for motional images to acquire
a better quality and readability.
When Movie Sense option is set to Low, Medium or High, this option will be available.
Movie Sense
Press OK button to activate the demo mode. While demo mode is active, the screen will
Demo be divided into two sections, one displaying the movie sense activity, the other displaying
the normal settings for TV screen. Press OK button again to cancel.
Films are recorded at a different number of frames per second to normal television programmes.
Film Mode
Skin Tone Skin tone can be changed between -5 and 5.
Colour Shift Adjust the desired colour tone.
While watching from a HDMI source, this feature will be visible. You can use this feature
HDMI Full Range
to enhance blackness in the picture.
English - 19 -
Dolby Vision
Dolby Vision logo will be displayed on the lower right side of the screen when Dolby
Vision content is detected.
PC Position Appears only when the input source is set to VGA/PC.
Autoposition Automatically optimizes the display. Press OK to optimize.
H Position This item shifts the image horizontally to the right hand side or left hand side of the screen.
V Position
This item shifts the image vertically towards the top or bottom of the screen.
Dot Clock adjustments correct the interference that appear as vertical banding in dot
Dot Clock
intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Depending on the input source(computer etc.) you may see a hazy or noisy picture on
Phase
the screen. You can use phase to get a clearer picture by trial and error.
Pixellence function optimizes the TV's video settings and helps to acquire a better
image quality. Press OK to activate Pixellence demo mode to experience Pixellence
Pixellence Demo
quality. Press OK button again to cancel. If the Mode option is set to Game this option
will not be available.
Reset Resets the picture settings to factory default settings (except Game mode).
Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture menu
while in PC mode.
Sound Menu Contents
Volume
Adjusts the volume level.
Equalizer Selects the equalizer mode. Custom settings can be made only when in User mode.
Balance Adjusts whether the sound comes from the left or right speaker.
Sets headphone volume.
Headphone
Please ensure before using headphones that the headphone volume is set to a low
level, to prevent damage to your hearing.
Sound Mode
You can select a sound mode (If the viewed channel supports).
Press OK to open the Bluetooth menu screen. Using this screen you can discover and
Bluetooth
connect the Bluetooth wireless technology enabled sound devices to your TV.
AVL (Automatic
Volume Limiting)
select this option as Lineout. If you have connected headphones to the TV, set this
option as Headphone.
Headphone/Lineout
Please ensure before using headphones that this menu item is set to Headphone. If it
is set to Lineout, the output from the headphone socket will be set to maximum which
could damage your hearing.
DTS TruSurround HD Enables or disables the DTS TruSurround HD.
Digital Out Sets digital out audio type.
Bass Gain Controls the bass gain level. Use Left or Right button to set.
English - 20 -
On,