Hitachi 43hk6500 Bedienungsanleitung Seite 34

Network Menu Contents
Network Type Disable the network connection or change the connection type.
Scan Wireless
Start a search for wireless networks. This option will be available if the Network Type
Networks is set as Wireless Device.
If your modem/router device has WPS, you can directly connect to it using this option.
Press WPS on your
Highlight this option and press OK. Go to your modem/router device and press the
WPS button on it to make the connection. This option will be available if the Network
Type is set as Wireless Device.
Start a speed test to check your connection bandwidth. The result will be displayed on
Internet Speed Test
Advanced Settings
Wake On Enable or disable this feature by setting it as On or Off.
Note: For detailed information on the options of this menu refer to the Connectivity section.
Installation Menu Contents
Displays automatic tuning options. D. Aerial: Searches and stores aerial DVB stations.
Automatic channel
D. Cable: Searches and stores cable DVB stations. Analogue: Searches and stores
scan (Retune)
analogue stations. Satellite: Searches and stores satellite stations.
Manual channel
This feature can be used for direct broadcast entry.
scan
Searches for the linked channels in the broadcast system. D. Aerial: Searches for aerial
Network channel
network channels. D. Cable: Searches for cable network channels. Satellite: Searches
scan
for satellite network channels.
if no analogue channels are stored and if currently watched channel is not an analogue
channel.
Displays satellite settings. Satellite list: Displays available satellites. You can Add,
Delete satellites or Edit satellite settings on the list. Antenna installation: You can
Satellite Settings
change satellite antenna settings and/or start a satellite scan. Satellite Channel Table:
You can upload or download satellite channel table data using the related options.
Displays installation settings menu. Standby Search (*): Your TV will search for new or
missing channels while in standby. Any new found broadcasts will be shown. Dynamic
Installation Settings Channel Update(*): If this option is set as Enabled, the changes on the broadcasts
such as frequency, channel name, subtitle language etc., will be applied automatically
(optional)
while watching.
Using this menu, you can edit the main and backup home transponder parameters,
including the Pid of the related M7 operator, which are used to download the channel
Setup Home
list. Set your preferences and press the Green button to save the settings. Then start
Transponder (*)
an M7 operator installation using the Automatic channel scan>Satellite menu.
Use this setting to clear channels stored. This setting is visible only when the Country
Clear Service List
option is set to Denmark, Sweden, Norway or Finland.
Select Active This setting allows you to select only the broadcasts within the selected network to be
listed in the channel list. This feature is available only for the country option of Norway.
Network
You can use this menu item to monitor signal related information such as signal level/
Signal Information
quality, network name etc for available frequencies.
First time installation Deletes all stored channels and settings, resets TV to factory settings.
Fransat Options
Displays Fransat options.
English - 21 -
Parental Control
installation to view current settings.
System
Displays system information.
Information
Reception
Displays current satellite reception information.
Information
CAS-Module Displays current CAS module information.
Upgrade
Displays software upgrade options.
System Menu Contents
Conditional Access Controls conditional access modules when available.
Language
You may set a different language depending on the broadcaster and the country.
Manage your privacy privileges for smart TV related applications. Press OK to enter
Privacy Settings (*)
the menu and set according to your preferences.
Enter correct password to change parental settings. You can easily adjust Menu Lock,
Maturity Lock, Child Lock or Guidance in this menu. You can also set a new PIN
or change the Default CICAM PIN using the related options.
Parental
Note: Some menu options may not be available depending on the country selection in the First Time
Installation
depending on the country selection) during the First Time Installation
Date/Time Sets date and time.
Edit the names, enable or disable selected source options. There are also Regular,
Enhanced and Disabled options available for HDMI sources. Regular and Enhanced
options are affecting the colour settings of the selected HDMI source. To be able to
Sources watch 4K or HDR/HLG images from an HDMI source related source setting should be
set as Enhanced if the connected device is compatible with HDMI 2.0 and subsequent
versions. Set as Regular if the connected device is HDMI 1.4 compatible. Set accordingly
or disable the related HDMI source by setting as Disabled.
Accessibility Displays accessibility options of the TV.
Hard of Hearing Enables any special feature sent from the broadcaster.
A narration track will be played for the blind or visually impaired audience. Press OK
to see all available Audio Description menu options. This feature is available only if
Audio
Description the broadcaster supports it.
Note: Audio description sound feature is not available in recording or time shifting mode.
If this feature is supported by your TV, you can view your ESN(*) number and deactivate
Note:
https://help.netflix.com/en/node/13444). When you start to stream video content via the
short time to be realised, or in the event of a slow connection not be possible. You should check
your internet capabilities with your internet provider if you are at all unsure.
More Displays other setting options of the TV.
Menu Timeout
Changes timeout duration for menu screens.
Standby LED If set as Off the standby LED will not light up when the TV is in standby mode.
HBBTV (*) You can enable or disable this feature by setting it as On or Off.
Software
Upgrade
English - 22 -
OK to see the menu options.