Pan-and-Tilt Head
Quick Release Plate
Knob Screw
Pan-and-Tilt Lock
Release the heading adjustment knob to adjust the heading angle of gimbal and
•
ensure the gimbal's position and level.
Release the roll and pitch adjustment knob and adjus the angle of roll/pitch at the
•
same time, and then screw it when it is suitable.
Release the gimbal lock and install the standard Arca quick release plate, then lock
•
the gimbal. the body to connect with tripod or other accessories to mount different
shooting devices.
The SLYPOD PRO's body is supported by an Arca-Swiss quick release plate with a 1/4"
and a 3/8" mount. Use the SLYPOD PRO like a motorized slider by mounting the SLYPOD
PRO horizontal.
Install
Attaching the Tripod to The SLYPOD PRO
Align the tripod with the 1 / 4" mount of the SLYPOD PRO. Rotate the tripod until it is
hand tight.
1/4" and 3/8"
Extension Hole
1/4" Mount
6
Pan-and-Tilt
Lock
Pan-and-Tilt
Screw
3/8" Mount