WP ProV1 2.Gen Bedienungsanleitung Seite 69

Screw the mounting plate into the wall using
the supplied screws (1). Do not
overtighten the screws and be careful that
the mounting plate does not bend.
(Mounting Bracket Optional)
Fasten the mounting bracket to the
wall using the mounting screws (1).
Now place the mounting plate on the
mounting bracket and fasten it with
the fixing screws (2).
After the mounting plate and mounting
bracket (optional) have been installed at the
mounting location, place the ProV1 on the
mounting plate until it is firmly seated. See
safety screw on page: 73