Mounting - Battery Operation
Optional:
ProV1 can also be mounted by adhesive pad.
Pull off the foil on one side and press it onto
the mounting plate (or mounting bracket).
Now pull off the second foil and press the
mounting plate (or mounting bracket) firmly
against a clean and smooth surface for a
minimum of 10 seconds.
Hold the mounting plate or mounting
bracket (optional) against the wall at the
desired mounting location and mark the drill
holes.
Drill the holes for the mounting plate (or
the mounting bracket) at the marked
locations. Clean the drill holes and insert
the dowels.
Instead of screw mounting, the