Reset; Firmware Update; Technical Data; Cleaning And Maintenance - Byron DIC-23312 Bedienungsanleitung

• Press the home icon to return to the main menu
• Press the return icon to return to the previous menu

8.4.7 Reset

If the connection with the BYhome app or outdoor unit (doorbell) is
lost, it can help to reset the indoor unit (monitor) to factory settings.
Preset the reset button on the home screen, then:
• Press OK to restore to factory settings
• Press Cancel to return to the previous menu
9

Firmware update

Your doorbell will receive over-the-air updates. You will be notified in
the app when an update is available. Follow the on-screen
instructions to download and install the update.
10

Technical Data

Outdoor camera Sensor type
View angle
Night vision
distance
Operating
temperature
Operating humidity
¼ " CMOS
About 70°
0.5 ~ 1m
-10°C ~+ 50°C
<85%RH
Indoor monitor Operating
Frequency
Wi-Fi standard
Screen size
Resolution
Supply voltage
Consumption
current
Operating
temperature
Operating humidity
SD card
11

Cleaning and maintenance

• Clean the outside of the appliance with a soft and slightly
moistened cloth.
• Do not use any carboxylic cleaning agents or petrol, alcohol or
similar. These attack the surfaces of the devices. Besides, the
vapors are hazardous to your health and explosive. Do not use
any sharp edged tools, screw drivers, metal brushes or similar for
cleaning.
12

Declaration of Conformity

Hereby, Smartwares Europe declares that the radio equipment type
DIC-23312 is in compliance with Directive 2014/53/EU
Instruction manual
2.4GHz
EN
802.11b/g/n
7 inch (diagonal)
1024X3(RGB)X600
DC 15V ⎓ / 1A
300 - 200mA
-10°C ~+ 50°C
<85%RH (max.)
Micro SD | max. 128GB
15