Personal Safety; Battery Safety - Stanley STHT77616 Bedienungsanleitung

GB
The label on your laser tool may include the following symbols.
Symbol Meaning
V Volts
mW Milliwatts
Laser Warning
nm Wavelength in nanometers
2 Class 2 Laser
WARNING
Laser Radiation Exposure. Do not disassemble or modify
the laser tool. There are no user serviceable parts inside.
Serious eye injury could result.
•
manufacturer, the protection provided by the equipment may
be impaired.
• Do not operate the laser in explosive atmospheres, such as
may create sparks which may ignite the dust or fumes.
• Store an idle laser out of reach of children and other untrained
persons. Lasers are dangerous in the hands of untrained
users.
•
personnel may result in injury. To locate your nearest Stanley
service center go to www.2helpU.com.
• Do not use optical tools such as a telescope or transit to view
the laser beam. Serious eye injury could result.
10
• Do not place the laser in a position which may cause anyone
to intentionally or unintentionally stare into the laser beam.
Serious eye injury could result.
•
injury could result.
• Turn the laser off when it is not in use. Leaving the laser on
increases the risk of staring into the laser beam.
• Do not modify the laser in any way. Modifying the tool may
result in hazardous laser radiation exposure.
• Do not operate the laser around children or allow children to
operate the laser. Serious eye injury may result.
• Do not remove or deface warning labels. If labels are
removed, the user or others may inadvertently expose
themselves to radiation.
• Position the laser securely on a level surface. If the laser falls,
damage to the laser or serious injury could result.

Personal Safety

• Stay alert, watch what you are doing, and use common sense
when operating the laser. Do not use the laser when you are
A moment of inattention while operating the laser may result
in serious personal injury.
• Use personal protective equipment. Always wear eye
protection. Depending on the work conditions, wearing
protective equipment such as a dust mask, nonskid safety
shoes, hard hat, and hearing protection will reduce personal
injury.
Tool Use and Care
Follow the instructions in the Maintenance and Care section
of this manual. Use of unauthorized parts or failure to follow
Maintenance and Care instructions may create a risk of electric
shock or injury.

Battery Safety

WARNING:
To reduce the risk of injury, the user must read the
Product Manual and the Laser Safety Manual.