Product Parameters; English; Function Introduction - PHOINIKAS Q1 Bedienungsanleitung

Product parameters

Product type
Speaker diameter:
Speaker impedance
Battery capacity
Battery type
Charging time
Noise Reduction Rating
Duration time
Transmission distance
Working voltage
Charging voltage
Headset
Accessories
Connect to Bluetooth earphone
1.Connected: continuously press
"Power ON" and indicator lights' lighting red and blue color separately, turn on
the bluetooth function of your mobile or other's equipment, and start to search
or scan, when searched "Q1" and connected, the indicator lights will shine
every five seconds,connected successfully.
2.Connected: when indicator lights' lighting red and blue color separately, turn on
the bluetooth function of your mobile or other's equipment, and start to search
or scan, when searched "Q1" and connected, the indicator lights will shine every
5

English

Dynamic Earphone
32Ω±15%
Polymer Lithium Battery
≥30 hours
≤DC4.75V-5.5V
Earphone/USB charging cable/Instruction
manual/Line IN cable/Storage bag
button (about 3s), when heard sounding of
five seconds, connected successfully.
3. Playing mode:indicator lights will shine one time every five seconds.
4.Unconnected mode: indicator lights will shine two times every five seconds, and after
10 minutes, earphone will turn off automatically. (The LED lights need to be closed
by manual)
5.Turn off : continuously press button
40mm
Off", indicator lights will be off . (The LED lights need to be closed by manual)
680mah

Function introduction

1. Function indicator.
3 Hours
2. Dial/answer/hang up button, pause/play button, power button.
3. "+" volume + (volume increase), press once to increase the volume by one step, long
-30DB
press and hold it for the next song, when the volume is increased to the maximum,
there will be a beep.
10 m 4. "-" volume-(volume reduction), press once to decrease the volume by one step, long
press and hold it for the previous song, when the volume is reduced to the minimum,
3.7V
there will be a beep.
5.Line In interface.
6.Bluetooth microphone.
7. Charging indicator.
8. Noise reduction switch.
9.USB charging port.
10.The three-section plug of the Line cable is plugged into
the Line interface of the earphone.
11. Line cord three-section plug, suitable for 3.5mm single jack audio
equipment such as mobile phones, tablet computers, notebook computers.
( about 3s), when heard sounding of "Power
7
8
9
1
2
3
4
5
6
6