Technical Data - Meec tools 019799 Bedienungsanleitung

EN
explosion or risk of personal injury.
• Do not expose batteries or power tools to
naked flames or heat. Batteries can
explode when exposed to naked flames or
temperatures higher than 130°C.
• Follow the instructions for charging and
charge the battery only at the
temperature indicated in the instructions.
Incorrect charging or charging outside the
given temperature range can damage the
battery and cause a fire.
SERVICE
• The power tool must only be serviced by
qualified service personnel using identical
spare parts. This will ensure that the
power tool remains safe to use.
• Never attempt to repair damaged
batteries. The battery must only be
serviced by the manufacturer or at an
authorised service centre.
SPECIAL SAFETY REGULATIONS FOR
RECIPROCATING SAWS
• Only hold the tool by the insulated grips
when working where the tool insert can
damage concealed electrical cables.
Contact with a live cable can supply
voltage to the metal parts on the tool and
result in an electric shock.
• Never hold the workpiece in your hand or
over your leg. Secure the workpiece in a
stable clamping device. It is important to
secure the workpiece firmly to reduce the
risk of body contact or loss of control.
MINIMISATION OF NOISE AND
VIBRATION
• Plan the work so that exposure to heavy
vibrations is spread over a longer period.
• To reduce noise and vibrations when in
use, limit the time the product is used,
and use low-power/vibration and noise
mode and suitable safety equipment.
28
• Take the following precautions to
minimise the risk of exposure to vibrations
and/or noise:
– Only use the tool in accordance with
these instructions.
– Check that the tool is in good
condition.
– Use accessories in good condition,
and which are suitable for the
purpose.
– Keep a firm grip on the handles/
grips.
– Maintain and lubricate the tool in
accordance with these instructions.
SYMBOLS
Read the instructions.
Wear safety glasses and ear
protection.
Wear a dust filter mask.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.

TECHNICAL DATA

Voltage
Stroke rate
Stroke length
Max sawing depth in wood
Sound pressure level, LpA 84.3 dB(A), K=3 dB
Sound power level, LwA
Vibration level a h, B
Vibration level a h, WB 9.154 m/s², K=1.5 m/s²
Weight
12 V DC
0-2700/min
20 mm
80 mm
95.3 dB(A), K=3 dB
7.845 m/s², K=1.5 m/s²
1.9 kg