Technical Data - Meec tools 020735 Bedienungsanleitung

EN
Wear a dust filter mask.
Wear ear protection.
Wear safety glasses or a visor.
Wear safety gloves.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.

TECHNICAL DATA

Rated voltage
Output
Speed
Sawing speed
Size
Weight
Sound pressure level, LpA 89.0 dB(A), K= 3 dB
Sound power level, LwA
Vibration level
a h, CM = 6.62 m/
Vibration level
a h, CM = 6.08 m/
Always wear ear protection!
The declared values for vibration and noise,
which have been measured according to a
standardised test method, can be used to
compare different tools with each other and
for a preliminary assessment of exposure. The
26
230 V ~ 50 Hz
1100 W
89 – 271 rpm
0.7 - 2.4 m/s.
L1140 x W13 xT 0,65 mm
13.7 kg
100 dB(A), K= 3 dB
s²
K= 1.5 m/
s²
K= 1.5 m/
measurement values have been determined in
accordance with EN 60745-2-20:2009.
DESCRIPTION
Metal bandsaw with base plate for sawing in
metal profiles. Fitted with integrated LED light
source.
PARTS
1. Tensioning arm
2. External carbon brushes
3. Support handle
4. Motor casing
5. Speed control
6. Power switch
7. Guide
8. Saw blade
9. Head bearing
10. Switch for work light
11. LED work light
FIG. 1
ASSEMBLY
WARNING!
Pull out the plug before adjusting or replacing
accessories.
FITTING THE GUIDE
s²
Fit the guide (7) before use.
1. Undo the screws on the bracket.
s²
2. Place the guide (7) round the saw blade.
3. Tighten the screws.
USE
Switch the LED work light on and off with the
switch (11).