Intended Use; Description Of The Features; Overview Of The Tool - Volpi KVS8000P Benutzerhandbuch

10. The depth of the slot of the tooth between
the wheel and chain does not exceed 0.5mm
11. Bar and chain are assembled correctly as
specified in this manual

5. Intended use

The tool is designed for pruning branches only.
A different use than indicated can damage the tool and cause dangers.
The tool is designed for adult use only, do not use in rainy weather or to work on wet plants or bushes.
The manufacturer is not responsible for damages caused by the non-observance of the instructions in
this manual.
Check the correct tension and sharpening of the chain before using the tool.
Damages caused by the use of an not sharpened and / or incorrectly tensioned chain are not covered
by the warranty.

6. Description of the features

The tool is suitable for pruning branches and cutting small diameter trees. It is recommended to comply
with the warnings contained in this user manual.
In case of danger or malfunction release the trigger, the chain will stop to prevent damage or injuries.

7. Overview of the tool

1) Chain
2) Bar
3) Oil tank
4) Chain oil cap
5) Head locking ring nut
6) Pinion housing
7) Lock nut
8) Chain tension adjustment screw
9) Hook
10) Pole adjustment ring nut
11) Pole adjustment counter ring
12. Any accessories used are conform and
original
13. The oil cap is closed correctly
12) Handle
13) Hand protection
14) Switch-on trigger
15) Safety trigger
16) Battery housing
17) Display
18) Lubrication adjustment button
19) Power button
20) Battery
21) Three-way battery charger
35