Troubleshooting; Possible Cause - Scheppach NTS30 Premium Original Bedienungsanleitung

15. Troubleshooting

The following table shows fault symptoms and describes remedial measures in the event of your machine failing to
work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault

Possible cause

Check whether the plug is plugged in.
Motor does not Check whether there is power to the socket.
run
Check whether the vacuum cleaner on/off
switch is switched on.
Is the brush blocked
Reduced
vacuuming
Is the dust bag full of dust
power
Is the filter full of dust
24 | GB www.scheppach.com
Remedy
Plug the mains plug back in to the socket.
Call an electrician.
Switch the on/off switch on.
Switch the vacuum cleaner off to remove
the blockages.
Remove and empty the dust bag.
Remove and empty the filter.