Before Use; Charging The Product - Parkside PALA 2000 A1 Bedienungs- Und Sicherheitshinweise

skin. Wear suitable protective gloves at all times if
such an event occurs.
This product has a built-in rechargeable battery which
cannot be replaced by the user. The removal or repla-
cement of the rechargeable battery may only be car-
ried out by the manufacturer or his customer service
or by a similarly qualified person in order to avoid
hazards. When disposing of the product, it should be
noted that this product contains a rechargeable battery.

Before use

Charging the product

Note: Remove all packaging materials from the product.
Note: You can recharge the product by using the USB
cable
10
current (see "Technical data").
Note: Use only SELV power supply of maximum working
output voltage 5 V
Insert the USB (type C) connector of the USB cable
into the USB input socket (type C)
Then insert the USB plug of the USB cable
USB port on USB power supply.
Note: Pay attention to the distance between the
lamp and USB power supply because USB cable
length is approx. 1 m.
Note: During charging, the charging indicator
up red (Fig. B). When charging is complete, the charging
indicator
is green, pull out the USB cable
socket (type C)
able battery from discharging.
10 GB/CY
WEAR PROTECTIVE GLOVES! Leaked
or damaged batteries / rechargeable bat-
teries can cause burns on contact with the
provided with the specified input voltage and
(Uout) 1A.
lights up green. When the charging indicator
8
of the product to prevent the recharge-
7
of the product.
7
from the USB input
10
10
into the
10
10
lights
8
8