Sony ZV-1F Einführungsanleitung Seite 9

Notes on use
Refer to "Precautions" in the "Help Guide"
as well.
Notes on handling the product
• This camera is designed to be dust-
and moisture-resistant, but is not
waterproof or dust-proof.
• Do not leave the lens exposed to a
strong light source such as sunlight.
Because of the lens's condensing
function, doing so may cause smoke,
fire, or a malfunction inside the camera
body or the lens. If you have to leave
the camera exposed to a light source
such as sunlight, attach the lens cap
to the lens.
• If sunlight or other strong light enters
the camera through the lens, it may
focus inside the camera and cause
smoke or fire. Attach the lens cap when
storing the camera. When shooting
with backlighting, keep the sun
sufficiently far away from the angle
of view. Even if it is slightly away from
the angle of view, smoke or fire may
still occur.
• Do not directly expose the lens to
beams such as laser beams. That may
damage the image sensor and cause
the camera to malfunction.
• This camera (including accessories)
has magnet(s) which may interfere
with pacemakers, programmable shunt
valves for hydrocephalus treatment, or
other medical devices. Do not place this
camera close to persons who use such
medical devices. Consult your doctor
before using this camera if you use any
such medical device.
• This camera is equipped with a
magnetic sensor. If the camera is
placed too close to a magnet or a
device with an internal magnet, the
camera may turn on. Take care not to
place the camera near any magnetic
devices.
• Increase the volume gradually. Sudden
loud noises can damage your ears.
• Do not leave the camera, the supplied
accessories, or memory cards within
the reach of infants. They may be
accidentally swallowed. If this occurs,
consult a doctor immediately.
Notes on the monitor
• The monitor is manufactured using
extremely high-precision technology,
and over 99.99% of the pixels
are operational for effective use.
However, there may be some small
black dots and/or bright dots (white,
red, blue or green in color) that
constantly appear on the monitor.
These are imperfections due to the
manufacturing process and do not
affect the recorded images in any way.
• If the monitor is damaged, stop using
the camera immediately. The damaged
parts may harm your hands, face, etc.
Notes on continuous shooting
When shooting still images continuously,
the monitor may flash between the
shooting screen and a black screen.
If you keep watching the screen in
this situation, you may experience
uncomfortable symptoms such as
feeling of unwellness. If you experience
uncomfortable symptoms, stop using
the camera, and consult your doctor as
necessary.
Notes on recording for long periods of
time or recording 4K movies
• Depending on the camera and
battery temperature, the camera may
become unable to record movies or
the power may turn off automatically
to protect the camera. A message will
be displayed on the screen before the
power turns off or you can no longer
record movies. In this case, leave the
power off and wait until the camera
and battery temperature goes down.
If you turn on the power without
letting the camera and battery cool
sufficiently, the power may turn off
again, or you may still be unable to
record movies.
• The camera body and battery may
become warm with use – this is normal.
EN
EN
9