HP StorageWorks ESL9000 Tape Library Referenzhandbuch Seite 104

Service-Befehle
Die Abbildungen 5-3 und 5-4 zeigen eine Übersicht über den Bildschirm Service.
System
Monitor
Fan 1 Power On Time
Fan 2 Command Time
Fan 3 Pick Bin Count
Fan 4 Place Bin Count
Fan 5* Pick Drive Count
Fan 6* Place Drive Count
+3.3 VDC Pick Load Port Count
+5.0 VDC Place Load Port Count
+12.0 VDC PTM Pick Count
-12.0 VDC PTM Place Count
Temp Sensor 1 Horizontal Move Count
Temp Sensor 2 Vertical Move Count
Temp Sensor 3 Extension Move Count
Temp Sensor 4* Extension Force Move Count
Power Supply 1 Gripper Move Count
Power Supply 2 DLT Handle Move Count
Power Supply 3 Rotary Move Count
Power Supply 4 Drive Pick Retry Count
Power Supply 5 Place Drive Retry Count
Power Supply 6 Drive Load Retry Count
Power Supply 7* Partial Grip Count
Power Supply 8* Barcode Scan Retry Count
AC Input 1 Horizontal Retry Count
AC Input 2 Vertical Retry Count
AC Input 3 Extension Retry Count
AC Input 4 Gripper Retry Count
Rotary Retry Count
Drive Handle Retry Count
Load Port Pick Retry Count
Horizontal Correction Count
Vertical Correction Count
*nur ESL9326 Ext Correction Count
Abbildung 5–3: Bedienfeld mit Bildschirm Service (1 von 2)
5–4
Service
Report
Statistics Actuator
Horizontal Position
Vertical Position
Extension Position
Rotary Position
Gripper Position
SysTest
Library
Results
Pick and Place Total Count
System Test Status
Total Test Time (sec)
Test Type
Avg. Drive to Bin Move Time
Avg. Bin to Drive Move Time
Avg. Bin to Bin Move Time
Longest Move Time
Bad Barcode Reading Count Last to Home Error Status
Place to Drive Count
Place to Bin Count
Place to Load Port Count
Steuerung
Wählen Sie zum Starten eine der
Registerkarten auf dem Bildschirm
Back
Bildschirmweise zurückblättern
Forward
Bildschirmweise vorwärts blättern
Home
Zurück zum Hauptbildschirm
Kontrast einstellen
ESL9000 Tape Library Referenzhandbuch
Auto
Clean
Auto Clean
Disabled/Enabled
Auto Clean Status
Cleaning Operation Count
Bad Operation Count
Untracked Operation Count
Last to Drive Error Status
Last to Load Port Error Status
SHR-1841